Tender Details
This request for Tender (RFT) covers the supply of a digital aerial camera/sensor, processing hardware and software to enable production of orthorectified photogrammetric quality imagery to meet the demands of the Department of Lands and users of this imagery.
The system should have the ability to:
(a) Provide an end to end solution for the capture, processing and delivery of orthorectified softcopy/hardcopy aerial imagery to a spatial accuracy.
(b) Provide within a single pass, the capture of Red, Green & Blue bands as well as Panchromatic and a near Near Infra Red bands.
(c) The system will incorporate a Global Navigation Satellite System receiver and a Interial Measuring Unit within the capture technology which will be compatible with the operation of the Department's Leica RC30 film camera.
The camera/sensor will be installed in the Department's C421c aircraft which is based in Bathurst NSW.
The aircraft is a dedicated airborne camera platform capable of operation to 8,000m.
The cabin is pressurised to a minimum altitude of 3000m.
The aircraft is presently fitted with Leica RC30 using a PAV20 mount, which should be capable of being reinstalled after removal of the digital camera/sensor.
The system should have the ability to:
(a) Provide an end to end solution for the capture, processing and delivery of orthorectified softcopy/hardcopy aerial imagery to a spatial accuracy.
(b) Provide within a single pass, the capture of Red, Green & Blue bands as well as Panchromatic and a near Near Infra Red bands.
(c) The system will incorporate a Global Navigation Satellite System receiver and a Interial Measuring Unit within the capture technology which will be compatible with the operation of the Department's Leica RC30 film camera.
Location
NSW Regions: Central West, Far West, Hunter, Illawarra, Mid North Coast, Murray, Murrumbidgee, Northern, North Western, Richmond Tweed, South Eastern, Sydney
RFT Type
Open Tenders - An invitation to tender by public advertisement with no restriction placed on who may tender. Tenderers will normally be required to demonstrate in their tender that they have the necessary skills, resources, experience, financial capacity, and in some cases licences, accreditations, etc., to fulfil the tender requirements.
RFT Preview Document(s)
Z_RFT_0601954 DIAS.pdf ( 4.47 MB)Tender Respondents
| Business Name | Trading Name | Address |
|---|---|---|
| Intergraph Corporation Pty Ltd | - | Level 3, 2 Julius Avenue North Ryde NSW 2113 AUSTRALIA |
| Leica Geosystems Pty Limited | - | 270 Gladstone Road Dutton Park QLD 4102 AUSTRALIA |
| The Trustee for Peter & Kay Jones Family Trust | Vexcel Australia Pty Ltd | 14 Strand Close Atwell WA 6164 AUSTRALIA |
Related Records
- Contract Award Notices:
- 0601954 Leica Geosystems Pty Limited
Additional Details / Instructions
The primary installation of the sensor and associated modules and cabling, will be under the supervision of the Aircraft Operator (AO) and proceed where necessary under the AO's subcontractor.
The Department will make the aircraft available to the AO and the successful tenderer for an agreed amount of time, which should be nominated in the Tender response document.
Documents available for this RFT/EOI (issued on 20/11/2006):
Both softcopy (electronic download files) and hardcopy (paper) complete copies of this RFT are available. A CD is not available
An Exhibited hard copy maybe available for public viewing by arrangement at McKell Building, 2-24 Rawson Place, Sydney, or another location as noted in the documents.
A separate Summary information file about this this RFT/EOI may be available If so download this single file to view the provided information.
Go to the blue View a Summary Document free link at the bottom of this page (then use the Save target as.. option to download and save this file to your PC). This Summary file may be protected so that it can only be viewed but not printed.
Obtaining the Documents:
First time visitors to this web site who wish to download or order documents will need to self-register on this web site to gain access to any documents.
Your completed tenders should be lodged as defined in the RFT documents, however they may usually be lodged electronically via this web page.
As the tenderer you must be a registered user in this system. Click on the blue LODGE A RESPONSE link at the bottom of this page and follow the on-screen instructions.
Optimum size of lodgement files is less than 7MB, and if your tender is larger in total size it could be broken down into smaller files, and uploaded in separate identified lodgements. The required response documents should not be bundled with supporting documentation. Note also that during the period 11pm to 3am system maintenance is carried out and successful lodgment may not be achieved.
PC Software Requirements:
To be able to open and read/view the downloaded files for this RFT you may require certain software to be installed on your PC:
An Internet connection to lodge completed responses.
This web site has been optimised for the Microsoft Internet Explorer and Netscape Navigator web browsers.
The minimum requirements are as follows IE version 5.5 or later, Firefox 1.0, Netscape Navigator Ver 4.7 or later with Cipher Strength = 128bit. Suggested minimum monitor resolution is 800x600.
Your web browser MUST be set to accept cookies. You will not be able to Register or accesss the documents if cookies have not allowed.
The tenderer is responsible for the provision and installation of the necessary software
Having Problems?
Having problems with logging in, responding, downloading, opening or viewing files? Please refer first to the FAQ section under the On-line ?HELP button at the top of this page. Should this not resolve the issue, the Commerce tendering office (email mto@commerce.nsw.gov.au or tel: 02 9372 8900) may then be contacted (quote RFT number and the issue)
The Department will make the aircraft available to the AO and the successful tenderer for an agreed amount of time, which should be nominated in the Tender response document.
Documents available for this RFT/EOI (issued on 20/11/2006):
Both softcopy (electronic download files) and hardcopy (paper) complete copies of this RFT are available. A CD is not available
An Exhibited hard copy maybe available for public viewing by arrangement at McKell Building, 2-24 Rawson Place, Sydney, or another location as noted in the documents.
A separate Summary information file about this this RFT/EOI may be available If so download this single file to view the provided information.
Go to the blue View a Summary Document free link at the bottom of this page (then use the Save target as.. option to download and save this file to your PC). This Summary file may be protected so that it can only be viewed but not printed.
Obtaining the Documents:
First time visitors to this web site who wish to download or order documents will need to self-register on this web site to gain access to any documents.
- A full soft copy of this RFT/EOI can be downloaded from this web site free of charge.
- To obtain the provided RFT document(s) you must download to your own computer all the files provided (including addenda), by clicking on the blue DOWNLOAD A SOFT COPY link at the bottom of this page and following the on-screen instructions.
- Hard copy can be ordered on-line via this Web Site, and it will then be posted to your registered street address (not a Post Office box).
To order click on the blue "ORDER A CD/HARD COPY" link at the bottom of this page and follow the on screen instructions; or - It may also be obtained by prior arrangement from the NSW Department of Commerce Tenders Office, McKell Building, 2-24 Rawson Place, Sydney 2000 (Tel: 02 9372 8900) between the hours of 8.30am and 4.30pm, Monday to Friday.
If a charge applies payment is by credit card (Bankcard, Visacard and Mastercard) or cheque only;
or - It may also be ordered by EFTPOS - telephone McKell Tenders Office on 02 9372 8900 between the hours of 8.30am and 4.30pm, Monday to Friday payment only by credit card or ;
- It may also be obtained from other locations if noted in the RFT Description text above.
Your completed tenders should be lodged as defined in the RFT documents, however they may usually be lodged electronically via this web page.
As the tenderer you must be a registered user in this system. Click on the blue LODGE A RESPONSE link at the bottom of this page and follow the on-screen instructions.
Optimum size of lodgement files is less than 7MB, and if your tender is larger in total size it could be broken down into smaller files, and uploaded in separate identified lodgements. The required response documents should not be bundled with supporting documentation. Note also that during the period 11pm to 3am system maintenance is carried out and successful lodgment may not be achieved.
PC Software Requirements:
To be able to open and read/view the downloaded files for this RFT you may require certain software to be installed on your PC:
- Adobe Acrobat Reader 5.0 (or more recent) Please click here Adobe Acrobat Reader to be taken to a free download site now.
- WinZip 7.0 (or more recent) or equivalent Please click here Winzip to be taken to a free evaluation download site now.
- Microsoft Word 97 (or more recent) or equivalent
- Microsoft Excel 97 (or more recent) or equivalent
The minimum requirements are as follows IE version 5.5 or later, Firefox 1.0, Netscape Navigator Ver 4.7 or later with Cipher Strength = 128bit. Suggested minimum monitor resolution is 800x600.
Your web browser MUST be set to accept cookies. You will not be able to Register or accesss the documents if cookies have not allowed.
The tenderer is responsible for the provision and installation of the necessary software
Having Problems?
Having problems with logging in, responding, downloading, opening or viewing files? Please refer first to the FAQ section under the On-line ?HELP button at the top of this page. Should this not resolve the issue, the Commerce tendering office (email mto@commerce.nsw.gov.au or tel: 02 9372 8900) may then be contacted (quote RFT number and the issue)
