Transport for NSW (Transport Infrastructure Projects) / Coffs Harbour Vessel Refuelling Facility Project - 22.0000138136.1579

TfNSW is seeking to engage a suitably qualified contractor to undertake the Coffs Harbour Vessel Refuelling Facility works.

Transport for NSW proposes to provide a new on-water vessel refuelling facility at Coffs Harbour Marina. The fuel facility would have a useable capacity of approximately 10,000 L of unleaded petrol, with a slightly larger storage capacity, for use by Government agencies, commercial parties and the public. 

Key elements of the works include but are not limited to:

• A bunded concrete slab of up to 120 m2 for the tank refuelling area with spill containment at fill point and stormwater drainage to Australian Standards and approximate 20 m2 concrete slab to connect to the existing driveway.
• A 10,000 L above ground self-bunded tank for unleaded petrol with fuel pump, cabinet and 4 m high venting mast. The tank is supported on a concrete plinth within the bunded concrete slab.
• A painted metal screening fence (up to 2.4 m high) of approximately 45 m length to provide separation with the maintenance facility works and screening for the fuel tank.
• A 17 m long gangway and 3 m wide by 17 m long fuel pontoon facility with a fuel bowser, bowser roof structure, outdoor payment terminal with card reader, double wall fuel pipe with rupture valves, emergency stop button, lighting and CCTV camera. The gangway connection would be supported by a concrete abutment.
• A fuel system with double wall fuel pipes, vapour return pipe, check valves, emergency stop buttons and control panel with warnings, alarms and flashing beacon.
• Elements to assist with safe vessel navigation to and from the fuel pontoon, including new untreated timber fender piles and waling adjacent to the existing travel lift runway, extra waling for the existing timber fender piles and signage.
• Elements to assist with protecting vessels, including heavy duty fendering for the new pontoon and for the existing public pontoon.

 

NSW Regions: Mid North Coast

Open Tenders - An invitation to tender by public advertisement with no restriction placed on who may tender. Tenderers will normally be required to demonstrate in their tender that they have the necessary skills, resources, experience, financial capacity, and in some cases licences, accreditations, etc., to fulfil the tender requirements.

22.0000138136.1579 Coffs Harbour Vessel Refueling Facility Project.pdf (340 KB)

These tenders are listed alphabetically. Some tenders may be qualified or contain errors and in view of the information given in the criteria for tender evaluation, the list should not be relied upon as an indication of which tender may be successful.

Site Inspection

A Site Inspection will take place on Friday 14 October 2022 at 38 Marina Drive, Coffs Harbour commencing at 12:00pm.

Attendance and Participation

Organisations wishing to attend the site inspection and participate in the tender for the Coffs Harbour Vessel Refuelling Facility Project must first complete a valid Confidentiality Deed Poll and submit back to the Contact Officer at bhavin.desai@transport.nsw.gov.au. 

Tenderers are permitted up to 2 attendees from each organsiation to attend the site inspection. Organisations are required to confirm each attendees name, email address and phone number and submit through to the Contact Officer at bhavin.desai@transport.nsw.gov.au.

TfNSW retains the right to issue the Tender documentation to Organisations at it's sole discretion. Please contact the Contact Officer if you are unable to locate the Confidentiality Deed Poll. 

Electronic lodgement only.

All tenderers are required to meet the following Minimum Requirements:

1) Tenderer must be able to demonstrate that their management systems meet the following requirements:

Work Health and Safety Management System

The Contractor’s WHS system must comply with the Work Health and Safety Management Guidelines for Construction Procurement (Edition 6, December 2019)..

Environmental Management System

The contractor’s Corporate Environmental Management System must comply with ISO 14001:2015 Environmental Management System or AS/NZS 14001:2016.

Quality Management System

The Contractor’s quality management system must meet the requirements of TfNSW Quality Management System Specification Q6.

 

No