Tender Details
The Principal requires the replacement of sixteen (16) 11kV 400A Reyrolle LMT type three-phase oil-filled circuit breakers (CB’s) and four (4) 11kV/110V 200VA Reyrolle D15RFLMT type three-phase dry-type voltage transformers (VT’s)
The supply of the replacement CB’s and VT’s shall include the design, manufacture, testing at works, delivery to site, installation, site commissioning tests and supply of all specified documentation and spare parts nominated by the Principal at the time of ordering.
Location
RFT Type
Additional Details / Instructions
Mandatory Site Inspection
Tenderers must complete a Mandatory Site Inspection, prior to tendering, at both sites. Travel distance by sealed road between sites is approximately 140km. The date & time for the inspections is as follows:
|
Date |
Time |
Location |
|
Thursday 14th May 2015 |
10:00 am |
Lower Tumut Substation (Near Talbingo NSW) Murray Jackson Drive, Talbingo, NSW 2720 35.60S / 148.28E |
|
Thursday 14th May 2015 |
2.00 pm |
Murray Substation (Near Khancoban NSW) Power Station Road, Khancoban, NSW 2642 36.22S / 148.14E |
All personnel must wear long sleeve shirts, trousers, safety helmets, enclosed footwear, protective glasses and high visibility shirts or vests when entering the TransGrid substation.
Conditions for Participation
Attendance at Mandatory Site Inspection
