Transport for NSW (Transport Infrastructure Projects) / Sandy Hollow Culway WIM Site - RTA.11.2587.0895

All tenderers must comply with the NSW Government Code of Practice for Procurement.

The works that are going to be carried out at the site under the contract 11.2587.0895 are

1.1               To carry out site Inspection and assessment of the strain gauges installed for CULWAY-Weigh-in-Motion (WIM) system on both the directions at the site and to reposition them to optimise the strain sensitivity if required.

1.2               To re-install MSI BL or better, Class-2 Piezo sensors where affected by strain gauge reposition

1.3               To Calibrate the CULWAY WIM system as per the RTA calibration Procedure Version-2. 

To view details, RFT documents and to respond, a passcode is required. To obtain a passcode, please contact the contact person in this RFT.

Important information

To obtain a copy of the full tender documentation payment is not required.  Complete all of the following steps:

1. Select the link below, DOWNLOAD A SOFT COPY. Log in or register.

2. Download the documents by clicking on the file name. Please read & follow the instructions and note that you will need WinZip to unzip the files.

All tenders are to be lodged electronically or in the tender box at the RTA's Tender Box, Ground Floor, 110 George St Parramatta NSW 2150.